Info: 'Your disk space is getting critically low. Try saving to a different volume before the document cannot be saved at all.'
DITL_166_Not Enough Disk Space.txt
Items: (2 entries)
0:
Bounds: x1=141, y1=60, x2=212, y2=79
Type: 4
Info: 'OK'
1:
Bounds: x1=81, y1=4, x2=309, y2=41
Type: -120
Info: 'There is not enough space on the disk to save this file!'
DITL_164_File Already Open.txt
Items: (2 entries)
0:
Bounds: x1=141, y1=60, x2=212, y2=79
Type: 4
Info: 'OK'
1:
Bounds: x1=81, y1=4, x2=309, y2=41
Type: -120
Info: 'That file is already open.'
DITL_162_Disk Error.txt
Items: (2 entries)
0:
Bounds: x1=184, y1=75, x2=255, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=68, y1=3, x2=375, y2=55
Type: -120
Info: 'A disk error has occurred and this operation cannot be completed.'
DITL_160_Set Default Alert.txt
Items: (3 entries)
0:
Bounds: x1=18, y1=115, x2=142, y2=135
Type: 4
Info: 'Save Defaults'
1:
Bounds: x1=170, y1=115, x2=291, y2=135
Type: 4
Info: 'Cancel'
2:
Bounds: x1=88, y1=10, x2=297, y2=107
Type: -120
Info: 'Save the ruler settings and text format of this document to be the defaults (so that new documents will have the same settings as the current settings).'
DITL_154_Preferences.txt
Items: (17 entries)
0:
Bounds: x1=32, y1=160, x2=92, y2=180
Type: 4
Info: 'OK'
1:
Bounds: x1=272, y1=160, x2=332, y2=180
Type: 4
Info: 'Cancel'
2:
Bounds: x1=40, y1=32, x2=144, y2=48
Type: 6
Info: 'Inches'
3:
Bounds: x1=40, y1=48, x2=146, y2=64
Type: 6
Info: 'Centimeters'
4:
Bounds: x1=40, y1=64, x2=138, y2=80
Type: 6
Info: 'Point'
5:
Bounds: x1=40, y1=80, x2=104, y2=96
Type: 6
Info: 'Pica'
6:
Bounds: x1=216, y1=32, x2=296, y2=48
Type: 6
Info: 'Sixths'
7:
Bounds: x1=216, y1=48, x2=296, y2=64
Type: 6
Info: 'Eighths'
8:
Bounds: x1=216, y1=64, x2=312, y2=80
Type: 6
Info: 'Tenths'
9:
Bounds: x1=216, y1=80, x2=328, y2=96
Type: 6
Info: 'Sixteenths'
10:
Bounds: x1=25, y1=16, x2=164, y2=110
Type: -64
Info: ' à'
11:
Bounds: x1=199, y1=16, x2=338, y2=110
Type: -64
Info: ' à'
12:
Bounds: x1=50, y1=11, x2=133, y2=28
Type: -120
Info: ' Ruler Units'
13:
Bounds: x1=227, y1=10, x2=312, y2=28
Type: -120
Info: ' Increments'
14:
Bounds: x1=160, y1=120, x2=320, y2=136
Type: 6
Info: 'Whole Increments'
15:
Bounds: x1=160, y1=136, x2=320, y2=152
Type: 6
Info: '1/2 Increments'
16:
Bounds: x1=32, y1=120, x2=152, y2=136
Type: -120
Info: 'Drag Ruler Marks:'
DITL_153_Paragraph Border.txt
Items: (27 entries)
0:
Bounds: x1=43, y1=132, x2=103, y2=152
Type: 4
Info: 'OK'
1:
Bounds: x1=356, y1=130, x2=416, y2=150
Type: 4
Info: 'Cancel'
2:
Bounds: x1=40, y1=48, x2=88, y2=64
Type: 5
Info: 'Top'
3:
Bounds: x1=40, y1=64, x2=96, y2=80
Type: 5
Info: 'Left'
4:
Bounds: x1=40, y1=80, x2=112, y2=96
Type: 5
Info: 'Bottom'
5:
Bounds: x1=40, y1=96, x2=104, y2=112
Type: 5
Info: 'Right'
6:
Bounds: x1=120, y1=48, x2=192, y2=64
Type: 6
Info: 'Black'
7:
Bounds: x1=120, y1=64, x2=176, y2=80
Type: 6
Info: 'Gray'
8:
Bounds: x1=120, y1=80, x2=224, y2=96
Type: 6
Info: 'Light Gray'
9:
Bounds: x1=120, y1=96, x2=200, y2=112
Type: 6
Info: 'Shadow'
10:
Bounds: x1=224, y1=48, x2=304, y2=64
Type: 6
Info: 'Hairline'
11:
Bounds: x1=224, y1=64, x2=304, y2=80
Type: 6
Info: 'Normal'
12:
Bounds: x1=224, y1=96, x2=293, y2=112
Type: 6
Info: 'Other = '
13:
Bounds: x1=296, y1=96, x2=336, y2=112
Type: 16
Info: ''
14:
Bounds: x1=24, y1=24, x2=72, y2=40
Type: -120
Info: 'Draw:'
15:
Bounds: x1=104, y1=24, x2=160, y2=40
Type: -120
Info: 'Pattern:'
16:
Bounds: x1=208, y1=24, x2=280, y2=40
Type: -120
Info: 'Thickness:'
17:
Bounds: x1=336, y1=24, x2=392, y2=40
Type: -120
Info: 'Format:'
18:
Bounds: x1=352, y1=48, x2=440, y2=64
Type: 6
Info: 'Single Line'
19:
Bounds: x1=352, y1=64, x2=448, y2=80
Type: 6
Info: 'Double Line'
20:
Bounds: x1=352, y1=80, x2=440, y2=96
Type: 6
Info: 'Triple Line'
21:
Bounds: x1=43, y1=51, x2=53, y2=61
Type: -128
Info: ''
22:
Bounds: x1=43, y1=67, x2=53, y2=77
Type: -128
Info: ''
23:
Bounds: x1=43, y1=83, x2=53, y2=93
Type: -128
Info: ''
24:
Bounds: x1=43, y1=99, x2=53, y2=109
Type: -128
Info: ''
25:
Bounds: x1=7, y1=7, x2=458, y2=123
Type: -64
Info: ' à'
26:
Bounds: x1=171, y1=2, x2=296, y2=20
Type: -120
Info: ' Paragraph Border'
DITL_152_Line Spacing.txt
Items: (27 entries)
0:
Bounds: x1=36, y1=244, x2=96, y2=264
Type: 4
Info: 'OK'
1:
Bounds: x1=259, y1=243, x2=319, y2=263
Type: 4
Info: 'Cancel'
2:
Bounds: x1=40, y1=32, x2=252, y2=48
Type: 6
Info: 'Auto (Varies With Point Size)'
3:
Bounds: x1=40, y1=48, x2=328, y2=64
Type: 6
Info: 'Additional (Added to each line position)'
4:
Bounds: x1=40, y1=64, x2=280, y2=80
Type: 6
Info: 'Prefered (Spaced If Appropriate)'
5:
Bounds: x1=40, y1=80, x2=288, y2=96
Type: 6
Info: 'Required (Spaced Unconditionally)'
6:
Bounds: x1=144, y1=106, x2=192, y2=122
Type: 16
Info: ''
7:
Bounds: x1=40, y1=106, x2=136, y2=122
Type: -120
Info: 'Line Spacing ='
8:
Bounds: x1=200, y1=107, x2=240, y2=123
Type: -120
Info: 'Point'
9:
Bounds: x1=112, y1=184, x2=168, y2=200
Type: 16
Info: ''
10:
Bounds: x1=248, y1=184, x2=304, y2=200
Type: 16
Info: ''
11:
Bounds: x1=112, y1=208, x2=168, y2=224
Type: 16
Info: ''
12:
Bounds: x1=248, y1=208, x2=304, y2=224
Type: 16
Info: ''
13:
Bounds: x1=48, y1=184, x2=104, y2=200
Type: -120
Info: 'Before:'
14:
Bounds: x1=48, y1=208, x2=96, y2=224
Type: -120
Info: 'After:'
15:
Bounds: x1=200, y1=184, x2=240, y2=200
Type: -120
Info: 'Left:'
16:
Bounds: x1=200, y1=208, x2=240, y2=224
Type: -120
Info: 'Right:'
17:
Bounds: x1=40, y1=161, x2=272, y2=177
Type: -120
Info: 'Add Extra Space To Paragraph(s):'
18:
Bounds: x1=145, y1=106, x2=191, y2=122
Type: -128
Info: ''
19:
Bounds: x1=113, y1=184, x2=167, y2=200
Type: -128
Info: ''
20:
Bounds: x1=249, y1=184, x2=303, y2=200
Type: -128
Info: ''
21:
Bounds: x1=113, y1=208, x2=167, y2=224
Type: -128
Info: ''
22:
Bounds: x1=249, y1=208, x2=303, y2=224
Type: -128
Info: ''
23:
Bounds: x1=16, y1=16, x2=332, y2=136
Type: -64
Info: ' à'
24:
Bounds: x1=133, y1=11, x2=224, y2=28
Type: -120
Info: ' Line Spacing'
25:
Bounds: x1=16, y1=143, x2=332, y2=234
Type: -64
Info: ' à'
26:
Bounds: x1=115, y1=138, x2=247, y2=156
Type: -120
Info: ' Paragraph Spacing'
DITL_150_Tab Leader.txt
Items: (9 entries)
0:
Bounds: x1=216, y1=24, x2=276, y2=44
Type: 4
Info: 'OK'
1:
Bounds: x1=216, y1=72, x2=276, y2=92
Type: 4
Info: 'Cancel'
2:
Bounds: x1=40, y1=32, x2=144, y2=48
Type: 6
Info: 'None'
3:
Bounds: x1=40, y1=48, x2=168, y2=64
Type: 6
Info: '..... Dot Leader'
4:
Bounds: x1=40, y1=64, x2=176, y2=80
Type: 6
Info: '---- Dash Leader'
5:
Bounds: x1=40, y1=88, x2=104, y2=104
Type: 6
Info: 'Other'
6:
Bounds: x1=110, y1=88, x2=142, y2=104
Type: 16
Info: ''
7:
Bounds: x1=26, y1=12, x2=189, y2=118
Type: -64
Info: ' à'
8:
Bounds: x1=55, y1=7, x2=162, y2=24
Type: -120
Info: ' Set Tab Leader'
DITL_144_Fix Font Alert.txt
Items: (2 entries)
0:
Bounds: x1=157, y1=116, x2=267, y2=136
Type: 4
Info: 'Continue'
1:
Bounds: x1=78, y1=6, x2=363, y2=109
Type: -120
Info: 'There are one or more fonts in this file that are not installed in your System.These will be converted to the default Application Font.'
DITL_142_32K Par Alert.txt
Items: (2 entries)
0:
Bounds: x1=157, y1=116, x2=267, y2=136
Type: 4
Info: 'Continue'
1:
Bounds: x1=78, y1=6, x2=363, y2=109
Type: -120
Info: 'Sorry, there must be at least one RETURN character within 32K of text. Please handle this situation, otherwise you won't be able to insert any more characters into this particular section.'
DITL_140_Save To Scrap?.txt
Items: (4 entries)
0:
Bounds: x1=10, y1=56, x2=81, y2=76
Type: 4
Info: 'Yes'
1:
Bounds: x1=172, y1=71, x2=252, y2=91
Type: 4
Info: 'Cancel Quit'
2:
Bounds: x1=9, y1=88, x2=81, y2=107
Type: 4
Info: 'No'
3:
Bounds: x1=72, y1=14, x2=275, y2=30
Type: -120
Info: 'Save Clipboard to Text Scrap?'
DITL_136_Special Styles.txt
Items: (13 entries)
0:
Bounds: x1=231, y1=22, x2=291, y2=42
Type: 4
Info: 'OK'
1:
Bounds: x1=231, y1=58, x2=291, y2=78
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=11, x2=192, y2=81
Type: -64
Info: ' Ñ'
3:
Bounds: x1=50, y1=12, x2=70, y2=33
Type: 5
Info: ' '
4:
Bounds: x1=50, y1=29, x2=70, y2=46
Type: 5
Info: ''
5:
Bounds: x1=50, y1=44, x2=70, y2=61
Type: 5
Info: ''
6:
Bounds: x1=50, y1=60, x2=70, y2=77
Type: 5
Info: ''
7:
Bounds: x1=48, y1=96, x2=104, y2=112
Type: 6
Info: 'Super'
8:
Bounds: x1=48, y1=112, x2=92, y2=128
Type: 6
Info: 'Sub'
9:
Bounds: x1=233, y1=108, x2=289, y2=124
Type: 16
Info: ''
10:
Bounds: x1=151, y1=106, x2=227, y2=124
Type: -120
Info: 'By (point):'
11:
Bounds: x1=105, y1=94, x2=147, y2=111
Type: -120
Info: 'Script'
12:
Bounds: x1=92, y1=115, x2=134, y2=132
Type: -120
Info: 'Script'
DITL_134_word wrapping.txt
Items: (5 entries)
0:
Bounds: x1=9, y1=93, x2=69, y2=113
Type: 4
Info: 'OK'
1:
Bounds: x1=199, y1=92, x2=259, y2=112
Type: 4
Info: 'Cancel'
2:
Bounds: x1=16, y1=40, x2=160, y2=56
Type: 6
Info: 'Word-Wrapping'
3:
Bounds: x1=16, y1=56, x2=272, y2=72
Type: 6
Info: 'No Word-Wrap ("Line Edit" Mode)'
4:
Bounds: x1=8, y1=8, x2=280, y2=24
Type: -120
Info: 'Select Word Wrap Characteristics:'
DITL_132_Make Point Size.txt
Items: (4 entries)
0:
Bounds: x1=25, y1=50, x2=85, y2=70
Type: 4
Info: 'OK'
1:
Bounds: x1=185, y1=50, x2=245, y2=70
Type: 4
Info: 'Cancel'
2:
Bounds: x1=209, y1=18, x2=252, y2=35
Type: 16
Info: '12'
3:
Bounds: x1=5, y1=17, x2=202, y2=35
Type: 8
Info: 'Make Your Own Point Size:'
DITL_131_Cant Undo.txt
Items: (3 entries)
0:
Bounds: x1=18, y1=115, x2=142, y2=135
Type: 4
Info: 'Abort Operation'
1:
Bounds: x1=170, y1=115, x2=291, y2=135
Type: 4
Info: 'Continue Anyway'
2:
Bounds: x1=83, y1=10, x2=273, y2=94
Type: -120
Info: 'There is insufficient memory to create an "Undo" buffer.What do you wish to do?'
DITL_130_Save Changes?.txt
Items: (4 entries)
0:
Bounds: x1=10, y1=56, x2=81, y2=76
Type: 4
Info: 'Yes'
1:
Bounds: x1=184, y1=72, x2=256, y2=92
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=88, x2=81, y2=107
Type: 4
Info: 'No'
3:
Bounds: x1=72, y1=8, x2=272, y2=24
Type: -120
Info: 'Save changes before closing?'
DITL_129_Out Of Mem.txt
Items: (2 entries)
0:
Bounds: x1=133, y1=77, x2=204, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=76, y1=4, x2=343, y2=71
Type: -120
Info: 'There is insufficient memory to continue this process and it will therefore be aborted.'